Academy Models P-47D Thunderbolt - Part IV

Well, this project has turned into something of an adventure, and I don't mean it in a good way. If previous stage was a learning experience in respect of usage of Alclad2 metalic lacquers, the stage that followed gave me a valuable lesson in regard of how paints from different manufacturers interact with each other.

In theory, once the aluminium finish was applied, painting stage of this project should have been practically finished. All that remained was the anti-glare olive drab stripe on the top of the fuselage and red edging at the front of engine cover. I decided to apply the olive stripe first. Masking the correct shape turned out to be much trickier that I expected, but after some trial and error I managed to tape off a shape that looked satisfactory. Next time, I will make my life a bit easier and will first make a paper template which I will the be able to use forboth sides of the stripe, instead of eyeballing it. Extra effort maybe, but at least the shape will be guaranteed uniform on both sides.

Couple of words regarding the paint I used for the anti-glare stripe, the Olive Drab "acrylic" from Tamiya. Yet another paint from that producer that behaved wonderfully when airbrushed - absolutely smooth finish with a bit of thinning and a delight in regard of control. I must say that Tamiya paints are quickly becoming my favorites when it comes to airbrushing, with LifeColor and Vallejo Air in second place and Humbrol as a distant third choice. It's such a shame that Tamiya's color range is so limited.

Final detail that I wanted to paint with the airbrush was the red 'edging' on the engine cover. Foolishly I decided to mask only the part of the component - after all all it would take would be a quick pass with the airbrush. Wrong! The Humbrol acrylic paint I used for the job (Crimsom Gloss 29) turned out to have very poor coverage and several layers were required to cover the olive drab stripe at the top. Due to lacking control of the airbrush and mounting frustration, I managed to overspray the masking in several places. This meant that I now had to mask of the red edging before correcting my mistakes. Said and done... the only problem was that when I removed the masking tape covering the red paint, the section that was sprayed over the Tamiya Olive Drab followed along with the tape like some sort of latex skin. I don't think I need to describe my frustration at that time.

Luckily, I was able to remove all of the Humbrol paint from the engine cover with my fingernails before more or less starting from scratch. This time around I applied red paint directly on the Alclad metalic and then resprayed the olive drab stripe.

After letting the paint dry for a couple of hours, I've decided to do 'just a little' work on the decals. The most prominent decal for this particular model is a head of an Indian chief, covering the left side of engine cover and fuselage. To fit, the decal had to be cut in two pieces before applying. I marked the outline of the engine cover on the backside of the decal, cut it in two and put the parts in appropriate positions. I was a bit surprised over how easy it went... I was also quite disappointed in the quality of the decal - its white sections are translucent', clearly showing the deep red of underlying surface. The problem is consistent for all decals for this kit, white sections show through quite a bit. It's a shame, because otherwise it's an excelent set of decals, with vivid colors and resilient to handling. Also, Microset and Microsol seem to work with them rather well.

Oh well... once the indian head was in place I decided to apply 'just a couple more decals'. Three and half hour later, even the most miniscule decals were in place.

Academy Models P-47D Thunderbolt - Part II

A quick update on progress of Thunderbolt project. As is customary, the first step was dedicated to the cockpit. The detail level is on par or a little better than that in recent offerings from Airfix - nicely detailed floor (although apparently incorrect for that specific type), a bit of detailing on the sides and simple, but adequate pilot seat. One detail that is different is the instrument panel - a truly lovely little piece of plastic with instruments engraved with surprising detail. In my opinion a much nicer alternative to the decals.

Since I intend to have the cockpit in the closed position, I didn't spend much effort on the interior. Cockpit green was sprayed everywhere with the exception of the instrument panel, while the detailing on the sides was picked out with a mix of black and german grey. The instrument panel was painted with same mix and when dry, slightly drybrushed with silver. As a last step, I filled in the instrument displays with gloss varnish, although I have to be honest and admit that in this scale it was a bit of a wasted effort.

With cockpit finished, it was time to put the model together. This step is idiot-proof and very simple. Grand total of six tightly fitting components produces a very nice Thunderbolt airframe.

Next it was time to proceed with the paint job, which is the main reason for me picking up this kit at this time. Since this particular Thunderbolt has mainly bare metal finish, it gives me the opportunity to try out these fancy Alclad2 lacquers everybody is raving about.

Couple of words about Alclad lacquers. First of all... well... they're laqcuers, a medium I have zero experience of and quite wary of. After all, anything that can only be cleaned up with cellulose thinner is guaranteed to be nasty stuff.

Oh well... who dares wins and all that. I've read up on Alclad lacquers on the net and was aware of the fact that black primer was a necessary first step. I used Alclad's own primer - my Badger 150 with 0,3mm needle didn't have any problems handling that paint, but cleanup was something of a nightmare. Anyway, the primer handles very well, dries very quickly to a mate finish. Having read that the finish of the primer is decisive for the final result, I took the extra mile and spent some time polishing the areas I could get to with 10.000 grade polishing sponge stick.

Academy Models P-47D Thunderbolt - Part I

Time for another first for me - this Thunderbolt is my very first model from Academy Models. I was aware of the company already in my teens, but for some reason I always thought that it was a second tier company. It's a good thing that I finally decided to grab a couple of their models, because the impression of this kit straight out of the box is very positive.

When comparing this kit with what I am used to get from Airfix, even their latest offerings, two words come to mind - delicate and basic. Individual components are beautifully moulded, with very nice recessed panel lines. Cockpit, instrument panel and wheels can best be described as functional, but not entirely deprived of detail. Construction process seems very traditional and straight-forward - based on initial impressions it could be a very nice beginner kit. I also appreciate the inclusion of a very nice selection of armament and external fuel tanks.

If a weak spot is to be pointed based only on initial inspection, then it's this kit's engine. Real world 'Jugs', as P-47s were called, were famous for their huge rotary engines. The engine included in this kit is surprisingly small, so much so that even I who normally am very insensitive to this sort of discrepancies raised an eyebrow in bewilderment.